Proline 67 GPM Clearwater II D.E. Filter

Model Number: WW 5205020N

Effective Filtration Area: 18 sqft.

Connection Size: 1.5"

Compatible With: Above Ground Pools

D.E. Required (not included): 2 lbs

Warranty: 1 Year

Installing the Proline 67 GPM Clearwater D.E. Filter

The Proline Clearwater D.E. Filter can be installed in just a few easy steps:

1. Place the Proline Clearwater D.E. Filter on a level surface such as a concrete slab or patio block
2. Ensure that the instructions, warnings and pressure gauge are easy to see for the operator
3. Position the filter in a way that the piping connections and drain port are accessible and make sure that there is adequate clearance around the filter to eliminate interference
4. Complete all plumbing connections by following your local plumbing and building codes
5. Open the air release knob
6. Plug the pump in and turn it on -at this time you will notice air pass out of the filter through the air release knob
7. After the water has discharged from the knob, close it.

Maintaining the Proline 67 GPM Clearwater D.E. Filter

A great aspect of the Proline 67 GPM Clearwater is that it is easy to maintain. When the pressure gauge on the pool filter reaches higher than 5 PSI, this is an indication that it is time to do some maintenance. Maintenance mainly includes basic cleaning of the pool filter. Instructions for this can be found in the manual included with your D.E. pool filter. Always ensure that the pump is turned off before you attempt to clean it to avoid injury.

With the Proline 67 GPM Clearwater D.E. Filter you can ensure that your pool remains clean and clear throughout the entire pool season.